STM32F030F4P6

Features:

• Core: Arm® 32-bit Cortex®-M0 CPU, up to 48 MHz
• Memories:
– 16 to 256 KB Flash memory
– 4 to 32 KB SRAM with hardware parity check
• CRC calculation unit
• Reset and power management:
– Digital & I/Os supply: VDD = 2.4 V to 3.6 V
– Analog supply: VDDA = VDD to 3.6 V
– Power-on/Power-down reset (POR/PDR)
– Low-power modes: Sleep, Stop, Standby
• Clock management:
– 4 to 32 MHz crystal oscillator
– 32 kHz oscillator for RTC with calibration
– Internal 8 MHz RC with x6 PLL option
– Internal 40 kHz RC oscillator
• Up to 55 fast I/Os:
– All mappable to external interrupt vectors
– Up to 55 I/Os with 5V tolerance
• 5-channel DMA controller
• One 12-bit ADC (up to 16 channels) with 1.0 µs conversion time:
– Conversion range: 0 to 3.6 V
– Separate analog supply: 2.4 V to 3.6 V
• Calendar RTC with alarm and periodic wakeup from Stop/Standby modes
• 11 Timers:
– One 16-bit advanced-control timer for six-channel PWM output
– Up to seven 16-bit timers with up to four IC/OC, OCN channels, suitable for IR signal decoding
– Independent and system watchdog timers
– SysTick timer
• Communication interfaces:
– Up to two I²C interfaces
– Fast Mode Plus (1 Mbit/s) support on one or two interfaces with 20 mA current sink
– SMBus/PMBus support (on one interface)
– Up to six USARTs supporting SPI master mode and modem control; one supports auto baud rate detection
– Up to two SPIs (18 Mbit/s) with 4- to 16-bit programmable data frames
• Serial Wire Debug (SWD)
• All packages are ECOPACK®2 compliant

Tags: STM32F030F4P6, STM32, Cortex-M0, microcontroller, 32-bit, TSSOP20, embedded systems, low power